The Ecosoft mineralizer is a cylindrical body with a mixture of calcite and activated carbon from coconut shells inside.
Fittings are pressed into the body of the Ecosoft mineralizer, so it takes 2-3 minutes to install.
Maintenance
The Ecosoft mineralizer for reverse osmosis filters is designed for post-treatment of cold tap water only. To obtain pure drinking water of absolute quality, it is recommended to change the coal mineralizer once every 6 months, regardless of the volume of water passed through.
Technical and operational characteristics
- Size - 2 "x10 "
- Height - 270 mm
- Maximum outer diameter - 55 mm
- Maximum service life - 6 months.
- Operating water temperature - +3...+43 °C
- Сonnection type - ¼"
WATER QUALITY AFTER MINERALIZER***
- pH - 6.5-7.5
- Mineralization - 20-30**** mg/l
- Calcium - <10 mg/l
- Magnesium - <1 mg/l
- Sodium + Potassium - <5 mg/l
- Hydrocarbonates - 10-20 mg/l
- Chlorides - <5 mg/l
*** Indicators are determined under the following conditions: 20°C inlet water temperature, inlet water composition and filter operation parameters correspond to those recommended by the manufacturer, water consumption intensity - a family of three. When the temperature of the inlet water decreases in winter, the mineral content in the treated water may be lower, and when the temperature increases in summer, it may be higher.
**** After the filter has been idle for more than an hour, the mineral content in the first glass of treated water may be higher than the specified values, as more minerals may dissolve during this period. This is normal and does not affect the quality of the purified water.