EMEC FACO basic dosing pump set is intended for dosing of water solutions of chemical reagents used in water treatment for pH adjustment and reduction of water corrosive activity. It might be also used for special-purpose reagents, including antiscalants and biocides.
Operation
Operation of the dosing station presents accurate supply of small volumes of reagents from the tank into the water flow line with a dosing pump. The dosing pump sucks the solution out of the reagent tank, and delivers its certain volume to the system.
A filter is installed at the suction valve of the dosing pump to prevent sediments from entering the pump resulting in its clogging.
Technical parameters
- Dosing mode: constant
- Nominal back pressure (Pnom): 5 bar
- Flow rate at Pnom: 0.8 L/h
- Maximum back pressure (Pmax): 10 bar
- Flow rate at Pmax: 0.6 L/h
- Volume of one injection: 0.07 mL
- Injection frequency: 0..120 injections/min
- Noise level: 74 dBA
- Dosing pump power: 16 W
- Power supply: 230 V, 50 Hz
- Temperature limit during storage / transportation: -10…+50 °С
- Temperature of dosing solutions: 0...+50 °С
- Material of components which contact with the dosing substance: EPDM
- Reagents tank volume: 60 L
- Reagents tank dimensions (diameter x height): 370 x 640 mm
- Pump (H x W x D, mm): 155 x 95 x 125
Main components
- Dosing pump
- Suction valve with foot filter and level probe
- Injection valve
- Pack of hoses
- Chemical tank with mounting bracket
- 500 mL graduated cylinder
- Water meter with pulse output (proportional dosing pumps only)
Benefits
- Accuracy and ease of setting
- Working pressure up to 10 bar
- Flow rate up to 6 L/h
- Low noise level
- Graphic display and text menu
D100660 TDS
